Ameda Mya Joy Personal Double Electric Breast Pump

Key Features:

• Hospital Strength Personal Double Electric Breast Pump.
• Ameda’s HygieniKit true closed system not only helps protect breast milk from backing up into the tubing but also prevents the system from potential. contaminants like bacteria, viruses, and mould growth.
• Uses either 4 AA Batteries or the included AC Power Adapter.
• Portable, lightweight, and clips right onto a waistband or pocket.
• Wide range of suction and speed settings, functions, and flange sizes.
• Operates at less than 45dB and allows for discreet pumping anywhere.
• Ultra-Quiet, operates at less than 45dB and allows for discreet pumping anywhere.

Technical Features:

• Hospital strength performance at home
• Up to 250 mmHg suction strength
• Large, backlit digital LCD display
• Timer display easily tracks pumping time
• Smart auto power off after 45 minutes
• 2-phase adjustable suction modes:
• Stimulation (6 Levels) & Expression Mode (12 Levels)
• 2-minute auto switch to Expression Mode
• Adaptable for single or double pumping
• Operates on 4 AA batteries or AC adapter
• Features Ameda HygieniKit Milk Collection System
• Compatible with Ameda’s CustomFitTM Flange System
• 2-Year Limited Warranty

Ameda Mya Joy Personal Double Electric Breast Pump:

How to Use the Ameda Mya Joy with the Hygienikit:

Does Mya Joy have a battery option?

Yes. The Mya Joy has an internal battery compartment that requires 4 AA batteries.

Mya Joy is so small – will It be powerful enough to use when I go back to work?

Yes. The Mya Joy pump features hospital strength performance and is designed for daily use by moms. It also features two modes of pumping (stimulation and expression) and a large range of settings for mom’s comfort. Plus – Joy is so small and quiet. Mom can take it with her where -ever she needs to go!

How often should I replace Valves and Diaphragms?

It is recommended that valves and diaphragms are replaced approximately every 8-12 weeks but this can vary depending on cleaning and use.

SLOW MILK FLOW, UNEVEN OR NO SUCTION

VALVE AND DIAPHRAGM CHECK:

Inspect the valves and diaphragms for tears or holes. Replace any damaged valves and diaphragms prior to pumping. Wash valves and diaphragms per cleaning section. Do not insert bottle brush or similar into valves. We recommend replacing valves and diaphragms approximately every 8-12 weeks but this can vary depending on cleaning and use.

CONNECTION CHECK:

Check assembly is correct and connection points are securely attached.

• Tubing adapter to tubing port
• Tubing adapter to tubing Check adapter cap is attached to the breast flange. It may be useful to remove the adapter cap and reattach it to the breast flange.
• FLANGE/BOTTLE CHECK: Check flanges, adapter caps or bottles for chips, cracks, breaks, or other damage. Replace any damaged flanges/adapter caps/bottles prior to pumping

BREAST FLANGE FIT CHECK:

• Good Fit: Nipple is moving freely in the tunnel of flange
• Too Small: Nipple is rubbing against tunnel of flange
• Too Large: Areola is being pulled into a tunnel of flange
• Check to make sure the breast shields form a complete seal around the breast while pumping

AUDIBLE, HISSING NOISE OR AIR LEAKAGE

VALVE AND DIAPHRAGM CHECK:

• Inspect the valves and diaphragms for tears or holes. Replace any damaged valves and diaphragms prior to pumping.
• Wash valves and diaphragms per cleaning section. Do not insert bottle brush or similar into valves. We recommend replacing valves and diaphragms approximately every 8-12 weeks but this can vary depending on cleaning and use.

CONNECTION CHECK:

Check assembly is correct and connection points are securely attached.

• Tubing adapter to tubing port
• Tubing adapter to tubing Check adapter cap is attached to the breast flange. It may be useful to remove the adapter cap and reattach it to the breast flange.
• Check adapter cap is attached to the breast flange. It may be useful to remove the adapter cap and reattach it to the breast flange.

POWER SOURCE

AC POWER ADAPTER:

• Ameda Mya Joy is optimized for use with the AC Power Adapter. Make sure the AC power adapter is plugged all the way into the side of your pump base. Make sure there are no batteries installed in the pump base. Make sure you rotate the suction dial-up to turn on the pump. Try your pump in a different electrical outlet.
• AA BATTERIES: Be sure the batteries have been inserted correctly as shown inside the breast pump base’s battery compartment. Use new premium batteries (such as Energizer, Duracell.) Do not use batteries with AC power adapter plugged into side of the pump base. If the problem persists, you can test that the batteries work in another battery-powered appliance.

“Lo” Notification on LCD Screen

When AA batteries are low, the LCD screen will display a “Lo” notification. You may then replace all batteries or use the AC Power Adapter.

“ERR” Notification on LCD Screen:

• Make sure the AC Power Adapter is the correct electrical rating (Approved Ameda AC Power Adapter).
• Replace the AC Power Adapter.