The Apex Pro-care Auto is a high specification pressure-relieving dynamic mattress designed to offer exceptional levels of support in any healthcare environment.
The Pro-care Auto dynamic mattress system automatically calibrates in accordance to the patients weight and position in the bed, eliminating the risk of injury to the patient by the caregiver entering the patients weight incorrectly.
Available for rental or purchase
Ask about our Trial or Demo
It is suitable for all types of patients, from pressure ulcer prevention right the way through to managing the most severe pressure ulcers.
The Pro-care Auto is one of the only mattresses on the market that has a designated heel zone allowing the caregiver to float the heel, meaning they can comply with EPUAP guidelines on pressure ulcer management in the heel area.
Designated Heel Zone: Allows the caregiver to isolate individual air cells in the heel area for 100% pressure offloading
Auto Adjust: Automatically adjusts the internal cell pressures depending on the individual patients weight and position on the mattress
Alternating Therapeutic Mode: Continuously and sequentially inflates and deflates the air cells to allow for pressure redistribution over a ten minute cycle time
Static Mode: Addresses areas of high contact pressure by redistributing the body mass over a greater surface area through a process of immersion
Seat Inflate Mode: When a patient is in the upright position, the seat inflate mode increases the pressure throughout the mattress in order to better support the sacral area
Low Pressure Alarm: Alerts the caregiver if there is a loss of air pressure in the mattress
Power Failure Alarm: Notifies the caregiver when there is a loss of power if the mattress is unplugged
Max Firm Mode: Hyper inflates the cells providing a firm surface for moving, handling and nursing procedures
Service Fault Indicator: Alerts the caregiver when the mattress needs to be repaired
Lock Out: Automatically locks the control panel to help prevent the changing of settings inappropriately
Rectangular Sacral Cell on Cell Design: Unique cell design offers the patient more support and comfort in the Sacral area throughout the therapeutic pressure relieving cycle. Facilitates patient transfer.
Cable Management: The left hand side of the mattress has a cable management system allowing the power cable to be stored off the floor during operation
No minimum weight
Mattress Dimensions: 200 x 85 x 20.3cm or 200 x 90 x 20.3cm
Mattress Weight: 7.1kg
Max Patient Weight: 250kg
Pump Size: 29.1 x 20 x 11.7cm
Pump Weight: 2.2kg
Cycle Time: 10 Minutes
Flame resistant to BS 7175 Crib 7
360 degree zip
White underside
Vapour permeability
Antimicrobial properties
Water resistant
Four way stretch
Machine washable
Reviews
There are no reviews yet.